National Service Hotline 0086-21-57340757
[Take you to know the difference between!]
Release date:[2024/5/8] Read a total of[153]time

Take you to know the difference between PP high-strength yarn and polyester silk!


Main physical and chemical properties of PP high-strength yarn


1. Form


The vertical surface of the polypropylene is flat and lubricated, and the cross-section is circular.


2. Density


The advantage of polypropylene is that it is light in texture, and its density is only 0.91g/cm3, which is the lighter type of common chemical fibers, so the same weight of polypropylene has a higher cover area than other fibers.


3, strong elongation


Polypropylene has high strength, large elongation, high initial modulus and excellent elasticity. So polypropylene wear resistance is good. In addition, the wet strength of polypropylene is fundamentally equal to the dry strength, so it is the ideal data for the manufacture of fishing nets and cables.


4. Hygroscopicity and dyeability


The hygroscopicity of polypropylene is very small, simply not hygroscopicity, and the moisture regain rate under a single atmospheric condition is close to zero. However, it has a core suction effect, which can transfer water vapor through the capillary tubes in the fabric, but it does not have any absorption effect on itself. The dyeing property of polypropylene is poor and the chromatography is incomplete, but the method of stock solution coloring can be used to compensate for the lack of.


5, acid and alkali resistance


Polypropylene has good chemical resistance, in addition to concentrated nitric acid, concentrated caustic soda, polypropylene has good resistance to acid and alkali, so it is suitable for filtration and packaging information.


6, light resistance, etc


Polypropylene light resistance is poor, thermal stability is poor, easy to age, not resistant to ironing. However, it can participate in the defense during spinning


What is polyester filament and its properties


Polyester is a single important type of synthetic fiber, and is the commodity title of polyester fiber in China. It is based on refined terephthalic acid (PTA) or dimethyl terephthalate (DMT) and ethylene glycol (EG) as raw materials through esterification or ester exchange and condensation reaction to prepare the forming polymer - polyethylene terephthalate (PET), spun and disposed of fibers.


Polyester filament has the following properties


1, high strength, short fiber strength is 2.6 ~ 5.7cN/dtex, high strength fiber is 5.6 ~ 8.0cN/dtex. Due to its low hygroscopic properties, its wet strength is fundamentally the same as its dry strength. The impact strength is 4 times higher than polyamide and 20 times higher than viscose fiber.


2, the elasticity is good, the elasticity is close to wool, when the elongation of 5% to 6%, it can be completely restored. Crease resistance exceeds other fibers, that is, the fabric does not wrinkle and has good dimensional stability. The elastic modulus is 22 ~ 141cN/dtex, which is 2 ~ 3 times higher than polyamide fiber.


3, good heat resistance


4, good water absorption


Through the above introduction, can you tell the difference between polyester silk and PP high-strength yarn?


Shanghai Jinci Industrial Co., Ltd, founded in March 2006, is a large entity company specializing in the production and sales of polypropylene fiber (PP yarn). The company's products include polypropylene general filament, PP high-strength yarn, polypropylene light body filament, polypropylene twist filament, polypropylene hollow filament, polypropylene fluorescent filament, polypropylene luminous filament, polypropylene flame retardant filament, polypropylene air variable filament, etc.

Related Keywords:
Phone:+86 13917218002 Tel:+86-021-57340757 E-mail:viola.luo@jcfibre.com Fax:+86-021-67221300 Add: No. 2658 Ting Feng Highway , Xin Nong Town , Jinshan District, Shanghai
Copyright: Shanghai Jinci Industrial Co., Ltd. Technical Support:中国丙纶网
如果本网站发布的文章或者图片或字体有侵权,请立即联系网站负责人进行删除,联系人:薛小姐 138 6101 6292,付小姐 153 1256 7839